SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
P6SMAF***CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
600 Watt Peak Pulse Power
FEATURES
* Plastic package has Under...
Description
P6SMAF***CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
600 Watt Peak Pulse Power
FEATURES
* Plastic package has Underwriters Laboratory Flammability Classification 94V-O
* For surface mounted applications in order to optimize board space
* Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate (duty cycle):0.01% * Fast response time: typically less than 1.0ps
from 0 Volts to V(BR) for unidirectional types * Typical IR less than 1mA above 10V
* High temperature soldering guaranteed:
260°C/10 seconds,
MECHANICAL DATA
Case: JEDEC SMA-FL molded plastic Terminals: Plated leads, solderable per
MIL-STD-202, Method 208 Mounting Position: Any Weight:0.0327 gram
1.DEVICES FOR BIPOLAR APPLICATIONS
We declare that the material of product is Haloggen free (green epoxy compound)
For Bidirectional use C or CA Suffix for types P6SMAF62CA
Electrical characteristics apply in both directions.marking like Uni; without color band.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
RATING Peak Power Dissipation at TA=25°C, TP=1ms(Note 1)
SYMBOL PPPM
Steady State Power Dissipation at TL=75°C(Note 2)
PM(AV)
VALUE Minimum 600
5.0
Peak Forward Surge Current, 8.3ms Single Half SineWave Superimposed on Rated Load(JECED Method) (Note 3)
IFSM
100
Operating ...
Similar Datasheet