P6SMAF300CA

MSV SEMI P6SMAF6.8CA to P6SMAF300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 600 Watt Peak Pulse Power FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate (duty cycle):0.01% * Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260°C/10 seconds, MECHANICAL DATA Case: JEDEC SMA-FL molded plastic Terminals: Plated leads, solderable per MIL-STD-202, Method 208 Mounting Position: Any Weight:0.0327 gram 1.DEVICES FOR BIPOLAR APPLICATIONS We declare that the material of product is Haloggen free (green epoxy compound) For Bidirectional use C or CA Suffix for types P6SMAF62CA Electrical characteristics apply in both directions.marking like Uni; without color band. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) SYMBOL PPPM Steady State Power Dissipation at TL=75°C(Note 2) PM(AV) VALUE Minimum 600 5.0 Peak Forward Surge Current, 8.3ms Single Half SineWave Superimposed on Rated Load(JECED Method) (Note ...