DUAL DMOS FULL-BRIDGE DRIVER
Data Sheet 29319.32
3971
ADVANCE INFORMATION
(Subject to change without notice)
May 2, 2000
DUAL DMOS FULL-BRIDGE DRI...
Description
Data Sheet 29319.32
3971
ADVANCE INFORMATION
(Subject to change without notice)
May 2, 2000
DUAL DMOS FULL-BRIDGE DRIVER
Designed to interface between external PWM control logic and
NO CONNECTION
1
NC
LOGIC GROUND
2
VDD
24
LOGIC SUPPLY
23 PWM2
inductive loads such as relays, solenoids, dc motors, or stepper motors, each full bridge can operate with output currents to ±2.5 A and operating voltages to 50 V.
S10 3 OUT1A 4
22 S20 21 OUT2A
Low rDS(on) DMOS output drivers provide low power dissipation during PWM operation. Internal charge pump circuitry is used to create
LOAD SUPPLY1
5
VBB1
LOAD
20 VBB2
SUPPLY2
a boosted voltage to fully enhance the high-side DMOS switches.
LOGIC LOGIC
GROUND 6 GROUND 7
tSENSE1 8 cOUT1B 99 uS11 10 dPWM1 11 ro lyCP1 12
CHARGE PUMP
19 GROUND 18 GROUND 17 SENSE2 16 OUT2B 15 S21 14 VCP 13 CP2
Dwg. PP-069-2
d P OnABSOLUTE MAXIMUM RATINGS at TA = +25°C
e eLoad Supply Voltage, VBB ................ 50 V u cOutput Current, IOUT tin nTr...
Similar Datasheet