NVM Programmable Power Switch
Preliminary
SLG6M6001V
SLG6M6001V
CurrentPAKTM Ultra-small 3.8 mΩ, 10 A, NVM Programmable
Power Switch with Current Sen...
Description
Preliminary
SLG6M6001V
SLG6M6001V
CurrentPAKTM Ultra-small 3.8 mΩ, 10 A, NVM Programmable
Power Switch with Current Sense
General Description
The SLG6M6001V is a 3.8 mΩ 10 A programmable, single-channel load switch that is able to switch 1 to 5 V power rails. A noise tolerant analog current mirror signal is provided for high-accuracy reporting over the full load range. The product is packaged in an ultra-small 2 x 3 mm package.
Features
2 x 3 mm STQFN 18L FC package (6 fused pins for drain and 6 fused pins for source)
Logic level ON pins able to support 1.05 V CMOS Logic 3.8 mΩ RDSONwhile supporting 10 A Discharges load when off Two Over Current Protection Modes (Short Circuit/Active)
Short Circuit Current Limit Active Current Limit Over Temperature Protection NVM programmable configuration for Ramp Rate, Discharge, Logic Cell, Temperature Limit, and Current Limit High / Low Current Select Automatic Switch from Low to High Current Cu...
Similar Datasheet