Document
NXP Semiconductors Data Sheet: Technical Data
KV4XP100M168 Rev. 4, 09/2019
KV4x Data Sheet
168 MHz Arm Cortex-M4 core based Microcontroller with FPU
The Kinetis KV4x MCU family is a member of the Kinetis V series and provides a high-performance solution for motor control and Digital Power Conversion. Built upon the Arm® Cortex®-M4 core operating at up to 168 MHz with DSP and floating point unit, features include; dual 12-bit analog-to-digital converters with 240ns conversion time, up to 30 PWM channels for support of multi-motor systems, eFlexPWM module with 312 ps resolution for digital power conversion applications, programmable delay block, memory protection unit, dual FlexCAN modules and 64 to 256 KB of flash memory. KV4x MCUs are offered in 48LQFP, 64LQFP, and 100LQFP packages. All Kinetis V series MCUs are supported by a comprehensive enablement suite from NXP and third-party resources including reference designs, software libraries and motor configuration tools.
MKV46FxxxVLy16 MKV44FxxxVLy16 MKV42FxxxVLy16 MKV46FxxxVLy16z MKV42FxxxVLy16z
100 LQFP
64 LQFP
14 x 14 x 1.4 Pitch 0.5 10 x 10 x 1.4 Pitch 0.5
mm
mm
48 LQFP 7 x 7 x 1.4 Pitch 0.5 mm
Core • Arm® Cortex®-M4 core up to 168 MHz with single precision Floating Point Unit (FPU)
Memories • Up to 256 KB of program flash memory • Up to 32 KB of RAM
System peripherals • 16-channel DMA controller • Low-leakage wakeup unit • SWD interface • Advanced independent clocked watchdog
Clocks • 32 to 40 kHz or 3 to 32 MHz crystal oscillator • Multipurpose clock generator (MCG) with frequencylocked loop and phase-locked loop referencing either internal or external reference clock
Operating Characteristics
• Voltage range: 1.71 to 3.6 V • Temperature range: –40 to 105 °C
Human-machine interface • General-purpose input/output
Communication interfaces • Two Universal Asynchronous Receiver/Transmitter (UART) / FlexSCI modules with programmable 8- or 9-bit data format • One 16-bit SPI module • One I2C module • Two FlexCAN modules
Analog Modules
• Two 12-bit cyclic ADCs • Four analog comparator (CMP) containing a 6-bit
DAC and programmable reference input • One 12-bit DAC
Timers • One eFlexPWM with 4 sub-modules, providing 12 PWM outputs • Two 8-channel FlexTimers (FTM0 and FTM3) • One 2-channel FlexTimers (FTM1) • Four Periodic interrupt timers (PIT) • Two Programmable Delay Blocks (PDB) • Quadrature Encoder/Decoder (ENC) • Ratio of timer input clock frequency vs. core frequency is 1:2 when core frequency is 168 Mhz, and 1:1 when core frequency is less than or equal to 100 Mhz
NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.
Security and integrity modules • Hardware CRC module to support fast cyclic redundancy checks • External Watchdog Monitor (EWM)
Orderable part numbers summary1
NXP part number
CPU Pin Total SRA
ADC
eFlexPWM PW
Flex Timers
DA FlexCAN
freq uenc
y (MHz
coun t
flash memo
ry (KB)
)
M (KB)
ADC A
ADC B
PW MA
PW MB
PW MX
M Nan o-
FTM 0
FTM 3
FTM 1
Edg
e
C
CA CA N0 N1
MKV46F256VLL 168 100 256 32 18ch 20ch 1x8ch 1x4ch Yes 1x8ch 1x8ch 1x2ch 1 1 1 16
MKV46F256VLH 168 64 256 32 13ch 16ch 1x8ch — Yes 1x8ch 1x8ch 1x2ch 1 1 1 16
MKV46F128VLL 168 100 128 24 18ch 20ch 1x8ch 1x4ch Yes 1x8ch 1x8ch 1x2ch 1 1 1 16
MKV46F128VLH 168 64 128 24 13ch 16ch 1x8ch — Yes 1x8ch 1x8ch 1x2ch 1 1 1 16
MKV44F256VLL 168 100 256 32 18ch 20ch 1x8ch 1x4ch Yes — — — 1 1 1 16
MKV44F256VLH 168 64 256 32 13ch 16ch 1x8ch — Yes — — — 1 1 1 16
MKV44F128VLL 168 100 128 24 18ch 20ch 1x8ch 1x4ch Yes — — — 1 1 1 16
MKV44F128VLH 168 64 128 24 13ch 16ch 1x8ch — Yes — — — 1 1 1 16
MKV44F128VLF 168 48 128 24 11ch 10ch 1x8ch — Yes — — — 1 1 — 16
MKV44F64VLH1 168 64 64 16 13ch 16ch 1x8ch — Yes — — — 1 1 1 6
MKV44F64VLF1 168 48 64 16 11ch 10ch 1x8ch — Yes — — — 1 1 — 6
MKV42F256VLL 168 100 256 32 18ch 20ch — — — 1x8ch 1x8ch 1x2ch — 1 1 16
MKV42F256VLH 168 64 256 32 13ch 16ch — — — 1x8ch 1x8ch 1x2ch — 1 1 16
MKV42F128VLL 168 100 128 24 18ch 20ch — — — 1x8ch 1x8ch 1x2ch — 1 1 16
MKV42F128VLH 168 64 128 24 13ch 16ch — — — 1x8ch 1x8ch 1x2ch — 1 1 16
MKV42F128VLF 168 48 128 24 11ch 10ch — — — 1x8ch 1x8ch 1x2ch — 1 — 16
MKV42F64VLH1 168 64 64 16 13ch 16ch — — — 1x8ch 1x8ch 1x2ch — 1 1 6
Table continues on the next page...
2 NXP Semiconductors
KV4x Data Sheet, Rev. 4, 09/2019
Orderable part numbers summary1 (continued)
NXP part number
CPU Pin Total
freq uenc
y (MHz
coun t
flash memo
ry (KB)
)
SRA M
(KB)
ADC
ADC ADC AB
MKV42F64VLF1 168 48 64 16 11ch 10ch 6
eFlexPWM PW PW MA MX PW MB
——
PW
Flex Timers
DA
M Nan o-
FTM 0
FTM 3
FTM 1
C
Edg
e
— 1x8ch 1x8ch 1x2ch —
FlexCAN CA CA N0 N1
1—
1. To confirm current availability of ordererable part numbers, go to http://www.n.