4A P-Channel Integrated Power Switch
SLG59M1649V
An Ultra-small, Low-power 23 mΩ/4 A P-Channel Integrated Power Switch with Reverse-Current Blocking
Genera...
Description
SLG59M1649V
An Ultra-small, Low-power 23 mΩ/4 A P-Channel Integrated Power Switch with Reverse-Current Blocking
General Description
The SLG59M1649V is a self-powered, high-performance, 23 mΩ pFET integrated power switch designed for 1.5 to 5 V power rail applications up to 4 A. When enabled, internal reverse-current protection will quickly open the switch in the event of a reverse-voltage condition is detected (a VOUT+50mV > VIN condition opens the switch). Upon the detection of a reverse condition, an open-drain FAULT output is asserted. In the event the VIN voltage is too low, the power switch also contains an internal UVLO threshold monitor to keep or to turn the switch OFF.
Designed to operate over a -40°C to 85°C range, the SLG59M1649V is available in a RoHS-compliant, ultra-small 1.0 x 1.6 mm STDFN package.
Pin Configuration
VIN 1 8 VOUT ON 2 7 GND ON 3 6 FAULT VIN 4 5 VOUT
8-pin STDFN (Top View)
SLG59M1649V
Features
Steady-state Operating Current: Up to 4 A Low ...
Similar Datasheet