28V Tolerant Power Splitter
SLG59H1302C
A Surge-protected, 28 V Tolerant Power Splitter in WLCSP
General Description
The SLG59H1302C is a 13...
Description
SLG59H1302C
A Surge-protected, 28 V Tolerant Power Splitter in WLCSP
General Description
The SLG59H1302C is a 130-V surge-protected, 28-V tolerant power splitter with two high-current switches and a 0.1 A capable LDO in 28-ball WLCSP. With independent control for each channel, the SLG59H1302C contains a 6 A capable, 12 mΩ nFET switch for the BUS-to-OUT path and a reverse-blocking 6 A capable, 24 mΩ nFET switch for the BUS-to-SYS path. An internal, “always ON” LDO is 0.1 A capable and can be used to supply power to downstream devices when the BUS terminal voltage is higher than 2.7 V. When the SYS terminal turns on, the IC’s push-pull PG output becomes asserted. The SLG59H1302C is fully specified over the industrial -40 °C to 85 °C temperature range.
Features
130 V-tolerant TVS (IEC61000-4-5) BUS-to-OUT nFET: 12 mΩ/6 A, 28 V tolerant BUS-to-SYS nFET: 24 mΩ/6 A B2B RB Always ON, BUS LDO: ±10% tol, 0.1 A capable BUS UVLO & OVLO Protection
OVP Response Time: 200 ns Push-pull PG (Power Good) Output Thermal Shutdown Protection Active-HIGH IC Shutdown Input Active-LOW ON1 Input (BUS-to-OUT) Active-HIGH ON2 Input (BUS-to-SYS) 28-ball CSP, 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch Pb-Free / Halogen-Free / RoHS Compliant Packaging
Pin Configuration
Pin A1 Index Mark 1
2
3
4
PG
SD BUSOK ON1
A
OUT OUT BUS ON2
B
OUT BUS BUS BUS
C
SYS BUS BUS BUS
D
SYS BUS BUS BUS
E
SYS BUS BUS BUS
F
GND GND GND GND G
(Laser Marking View) 2.98 x 1.69 x 0.44 m...
Similar Datasheet