SLG59H1313C

SLG59H1313C  A 23 mΩ, 4.5 A nFET Load Switch with Surge Protection and Adjustable OVP in a 2.34 mm2 WLCSP General Description The SLG59H1313C features a low 23 mΩ RDSON internal nFET that protects low-voltage 2.5 Vdc to 5.5 Vdc operating systems against voltage faults up to 29 Vdc. An internal clamp circuit protects the downstream components from surge voltage up to 100 V. The SLG59H1313C features a fast 50 ns (typ) over-voltage response time that turns off the internal nFET if the input voltage exceeds the OVP threshold. The OVP threshold is adjustable with optional external resistors to any voltage between 4 V and 20 V. Over-temperature protection powers down the device at 145°C (typ). SLG59H1313C also features an Over-current protection that turns off the switch if the current exceeds 7 A (typ), this gives additional protection from over-heating the device. SLG59H1313C incorporates an open-drain output PG pin. When VIN_min < VIN < VOVLO and the switch is on, PG will be driven low indicating a good power input, otherwise it is high impedance. Features Pin-to-pin to FPF2280 with Improved Performance Surge protection (IEC61000-4-5: >100 V) Input maximum voltage rating: 29 Vdc Integrated low RDSON nFET switch: 23 mΩ (typ) 4.5 A continuous current capability Over-Voltage Protection (OVP): adjustable 4 V to 20 V Over-Temperature Protection (OTP): 145°C (typ) 7 A Over-Current Protection (OCP) Fast OVP turn-off response: typical 50 ns 1.3 mm x 1.8 mm in ...