TVS Diodes
15KPA-HR Series
TVS Diodes
Axial Leaded – 15 kW > 15KPA-HR series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency...
Description
15KPA-HR Series
TVS Diodes
Axial Leaded – 15 kW > 15KPA-HR series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2)(Note 1)
PPPM
15
kW
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6)
PD
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
8.0
W
400
A
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
Typical Thermal Resistance Junction to Ambient RƟJA
8.0 °C/W 40 °C/W
Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
Descriptions
The 15KPA-HR High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
15 kW peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Glass passivated chip junction in P600 package
Fast response time: typically less than 1.0ps from 0 Volts to VBR min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted ...
Similar Datasheet