AC Thyristor power switch
ACT108W-800E
AC Thyristor power switch
Rev.04 - 31 August 2021
Product data sheet
1. General description
AC Thyristor ...
Description
ACT108W-800E
AC Thyristor power switch
Rev.04 - 31 August 2021
Product data sheet
1. General description
AC Thyristor power switch in a SOT223 surface-mountable plastic package with self-protective capabilities against low and high energy transients.
2. Features and benefits
Common terminal on mounting base allows multiple ACTs on shared cooling pad Exclusive negative gate triggering Full cycle AC conduction High voltage capability Remote gate separates the gate driver from the effects of the load current Safe clamping of low energy over-voltage transients Self-protective turn-on during high energy voltage transients Surface-mountable package Very high noise immunity
3. Applications
Fan motor circuits Pump motor circuits Lower-power highly inductive, resistive and safety loads Contactors, circuit breakers, valves, dispensers and door locks
4. Quick reference data
Table 1. Quick reference data
Symbol Parameter
VDRM
repetitive peak off-state voltage
IT(RMS)
RMS on-state current
ITSM
non-repetitive peak on-
state current
Tj
junction temperature
VPP
peak pulse voltage
Conditions
full sine wave; Tsp ≤ 112 °C; Fig. 1; Fig. 2; Fig. 3 full sine wave; Tj(init) = 25 °C; tp = 20 ms; Fig. 4; Fig. 5 full sine wave; Tj(init) = 25 °C; tp = 16.7 ms
Tj = 25 °C; non-repetitive, off-state; ten pulses on each voltage polarity; 20s or more between successive pulses; Fig. 6
Min Typ Max Unit
-
-
800 V
-
-
0.8 A
-
-
13 A
-
-
14.3 A
-
-
125...
Similar Datasheet