Low Noise Amplifier
AM-143 / AMC-143
Low Noise Amplifier, 16 dB Gain, 5 - 500 MHz
Features
1.9 dB Typical Midband Noise Figure +7 dBm Ty...
Description
AM-143 / AMC-143
Low Noise Amplifier, 16 dB Gain, 5 - 500 MHz
Features
1.9 dB Typical Midband Noise Figure +7 dBm Typical Midband Output Power +20 dBm Typical Third Order Intercept
Description
M/A-COM’s AM-143 is a coupler feedback amplifier with low noise figure and high intercept points for the low bias current. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8 package. The ground plane on the PC board should be configured to remove heat from under the package. AM-143 are ideally suited for use where a low noise, high reliability amplifier is required.
TO-8-1
Rev. V4
Ordering Information
Part Number AM-143 PIN 3 AMC-143 SMA
Package TO-8-1
Connectorized
3. Mounting kit part number AU00071 required for PCB applications.
Outline Drawing: SMA Connectorized *
Absolute Maximum Ratings 1
Parameter Max. Input Power
Vbias Operating Temperature Storage Temperature
Absolute Maximum +20 dBm +1...
Similar Datasheet
- AM-1024600-070IP LCD - Amson
- AM-1024600B3TMQW-00H LCD - AMPIRE
- AM-1024600BTMQW-00H LCD - AMPIRE
- AM-1024600BTMQW-T00H LCD - AMPIRE
- AM-1024600KTMQW-01H LCD - AMPIRE
- AM-1024600L2TMQW-00H LCD - AMP DISPLAY
- AM-1024600L3TMQW-T05H LCD - AMPIRE
- AM-1024768ETMCW-00 LCD - AMPIRE
- AM-1024768FTMQW-00H-F LCD - AMP DISPLAY
- AM-1024768G1TMQW-00H LCD - AMPIRE