Document
BFP92A/BFP92AW
Vishay Telefunken
Silicon NPN Planar RF Transistor
Electrostatic sensitive device. Observe precautions for handling.
Applications
RF amplifier up to GHz range, especially for wide band antenna amplifiers.
Features
D High power gain D Low noise figure D High transition frequency
2 1 2 1
94 9279
13 579
13 653
13 566
3
4
3
4
BFP92A Marking: 92V Plastic case (SOT 143) 1 = Collector, 2 = Emitter, 3 = Base, 4 = Emitter
BFP92AW Marking: W92 Plastic case (SOT 343) 1 = Collector, 2 = Emitter, 3 = Base, 4 = Emitter
Absolute Maximum Ratings
Tamb = 25_C, unless otherwise specified Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Total power dissipation Junction temperature Storage temperature range Test Conditions Symbol VCBO VCEO VEBO IC Ptot Tj Tstg Value 20 15 2 30 200 150 –65 to +150 Unit V V V mA mW °C °C
Tamb ≤ 60 °C
Maximum Thermal Resistance
Tamb = 25_C, unless otherwise specified Parameter Test Conditions Junction ambient on glass fibre printed board (25 x 20 x 1.5) mm3 plated with 35mm Cu Symbol RthJA Value 450 Unit K/W
Document Number 85019 Rev. 3, 20-Jan-99
www.vishay.de • FaxBack +1-408-970-5600 1 (10)
BFP92A/BFP92AW
Vishay Telefunken Electrical DC Characteristics
Tamb = 25_C, unless otherwise specified Parameter Collector cut-off current Collector-base cut-off current Emitter-base cut-off current Collector-emitter breakdown voltage Collector-emitter saturation voltage DC forward current transfer ratio Test Conditions VCE = 20 V, VBE = 0 VCB = 15 V, IE = 0 VEB = 2 V, IC = 0 IC = 1 mA, IB = 0 IC = 30 mA, IB = 3 mA VCE = 10 V, IC = 14 mA Symbol Min Typ Max Unit ICES 100 mA ICBO 100 nA IEBO 10 mA V(BR)CEO 15 V VCEsat 0.1 0.4 V hFE 50 100 150
Electrical AC Characteristics
Tamb = 25_C, unless otherwise specified Parameter Transition frequency Collector-base capacitance Collector-emitter capacitance Emitter-base capacitance Noise figure Power gain Linear output voltage – two tone intermodulation test Third order intercept point Test Conditions VCE = 10 V, IC = 14 mA, f = 500 MHz VCB = 10 V, f = 1 MHz VCE = 10 V, f = 1 MHz VEB = 0.5 V, f = 1 MHz VCE = 10 V, ZS = 50 W, f = 800 MHz, IC = 2 mA VCE = 10 V, ZL = ZLopt, IC = 14 mA, f = 800 MHz VCE = 10 V, IC = 14 mA, dIM = 60 dB, f1 = 806 MHz, f2 = 810 MHz, ZS = ZL = 50 W VCE = 10 V, IC = 14 mA, f = 800 MHz Symbol fT Ccb Cce Ceb F Gpe V1 = V2 IP3 Min Typ 6 0.25 0.2 0.7 1.8 18 120 Max Unit GHz pF pF pF dB dB mV
24
dBm
www.vishay.de • FaxBack +1-408-970-5600 2 (10)
Document Number 85019 Rev. 3, 20-Jan-99
BFP92A/BFP92AW
Vishay Telefunken Common Emitter S–Parameters
Z0 = 50 W, Tamb = 25_C, unless otherwise specified S11 VCE/V IC/mA f/MHz 100 300 500 800 1000 1200 1500 1800 2000 2200 2500 2800 3000 100 300 500 800 1000 1200 1500 1800 2000 2200 2500 2800 3000 100 300 500 800 1000 1200 1500 1800 2000 2200 2500 2800 3000 LIN MAG 0.905 0.795 0.677 0.552 0.499 0.478 0.463 0.464 0.478 0.492 0.501 0.532 0.550 0.790 0.619 0.499 0.427.