MCP2562FD

MCP2561/2FD High-Speed CAN Flexible Data Rate Transceiver Features: Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps) Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements Very Low Standby Current (5 µA, typical) VIO Supply Pin to Interface Directly to  CAN Controllers and Microcontrollers with  1.8V to 5.5V I/O SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes CAN Bus Pins are Disconnected when Device is Unpowered - An Unpowered Node or Brown-Out Event will Not Load the CAN Bus Detection of Ground Fault: - Permanent Dominant Detection on TXD - Permanent Dominant Detection on Bus Power-on Reset and Voltage Brown-Out Protection on VDD Pin Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage) Protection Against High-Voltage Transients in Automotive Env...