MC12095

Order this document by MC12095/D 2.5 GHz Low Power Prescaler With Stand-By Mode The MC12095 is a single modulus prescaler for low power frequency division of a 2.5 GHz high frequency input signal. Motorola’s advanced MOSAIC™ V technology is utilized to acheive low power dissipation of 24 mW at a minimum supply voltage of 2.7 V. On–chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added in parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control input (SW) selects the required divide ratio of ÷2 or ÷4. Stand–By mode is available to reduce current drain to 100µA typical when the standby pin SB is switched LOW disabling the prescaler. 2.5 GHz Toggle Frequency Supply Voltage 2.7 V to 5.5 Vdc Low Power 8.7 mA Typical Operati...