Post amplifier
Optical disc ICs
Post amplifier applicable with 1- bit D / A converter
BH3563FV
The BH3563FV is a post amplifier applic...
Description
Optical disc ICs
Post amplifier applicable with 1- bit D / A converter
BH3563FV
The BH3563FV is a post amplifier applicable with 1-bit D / A converter for compact disc players. FApplications Portable CD players, etc. FFeatures 1) 2-channel analog filter IC for 1-bit D / A converters. 2) Internal partial CR for two channels (left and right) LPF. FAbsolute maximum ratings (Ta = 25_C)
3) Operates on a single power supply. 4) Operates on a power supply voltage as low as 3.1V.
FRecommended operation conditions (Ta = 25_C)
133
Optical disc ICs
FBlock diagram
BH3563FV
134
Optical disc ICs
FPin descriptions
BH3563FV
135
Optical disc ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 3.5V, RL = 10kΩ)
BH3563FV
136
Optical disc ICs
FMeasurement circuit
BH3563FV
137
Optical disc ICs
FApplication example
BH3563FV
FOperation notes (1) When the MUTE pin voltage reaches 1.5V or higher, the output voltage is muted and the bias level is output. (2) Frequency characteristics can be changed by adjusting the capacitor attached to pin 3 (pin18) or pin 5 (pin16). (3) Gain can be changed by attaching a resistor to pin 4 (pin17).
(4) To prevent popping sounds due to sudden fluctuation in the mute pin voltage, attach a capacitor (approximately 1µF) to pin 7. (5) Be sure to connect the IC to a 0.1µF bypass capacitor to the power supply, at the base of the IC.
138
Optical disc ICs
FElectrical characteristic curve
BH3563FV
FExternal dimensions (Units: mm)
1...
Similar Datasheet