Optical disc ICs
Post amplifier applicable with 1-bit D / A converter
BH3561AF
The BH3561AF is a post amplifier applica...
Optical disc ICs
Post amplifier applicable with 1-bit D / A converter
BH3561AF
The BH3561AF is a post amplifier applicable with 1-bit D / A converter for compact disc players. FApplications CD players, etc. FFeatures 1) 2-channel analog filter IC for 1-bit D / A converters. 2) Internal partial CR for two channels (left and right) LPF. FBlock diagram
3) Operates on a single power supply.
121
Optical disc ICs
FAbsolute maximum ratings (Ta = 25_C)
BH3561AF
FRecommended operating conditions (Ta = 25_C)
FPin descriptions
122
Optical disc ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC1 = 5V, VCC2 = 5V, RL = 10kΩ)
BH3561AF
123
Optical disc ICs
FMeasruement circuit
BH3561AF
124
Optical disc ICs
FApplication example
BH3561AF
FOperation notes (1) When the MUTE pin voltage reaches 1.5V or higher, the output voltage is muted and the bias level is output. (2) Frequency characteristics can be changed by adjusting the capacitor attached to pin 3 (pin 20) or pin 5 (pin 18). (3) Gain can be changed by attaching a resistor to pin 4 (pin 19). (4) Attach a
transistor to pin 7 (pin 16) to mute popping sounds. Recommended
transistor : 2SD1781K
(5) The reset block idling power supply for pin 15 should be left on as it prevents popping sounds. (6) To prevent popping sounds due to sudden fluctuation in the power supply voltage, configure a ripple filter. (7) To prevent popping sounds due to sudden changes in the mute pin voltage, connect pin 8 to a 1µF (appr...