TONE/PULSE DIALER
W91610 SERIES
TONE/PULSE DIALER WITH TWO-STAGE REDIAL FUNCTION
GENERAL DESCRIPTION
The W91610 series are Si-gate CMOS I...
Description
W91610 SERIES
TONE/PULSE DIALER WITH TWO-STAGE REDIAL FUNCTION
GENERAL DESCRIPTION
The W91610 series are Si-gate CMOS ICs that provide the signals needed for either pulse or tone dialing.
FEATURES
DTMF/Pulse switchable dialer 32-digit redial memory Two-stage redial function Pulse-to-tone (P→T) keypad for long distance call operation Easy operation with redial, flash, pause and P→T keypads Pause, pulse-to-tone (P→T) can be stored as a digit in memory Tone output duration: as long as key is depressed or 90 mS minimum Minimum intertone pause: 90 mS Flash time: 100 mS Uses 4 × 5 keyboard On-chip power-on reset Uses 3.579545 MHz crystal or ceramic resonator Packaged in 18-pin DIP The different dialers in the W91610 series are shown in the following table:
TYPE NO.
DIALING RATE
PAUSE
B:M
W91610 W91611
10 ppS
4 sec
2:1 3:2
FLASH 100 mS
Publication Release Date: July 1996 - 1 - Revision A3
PIN CONFIGURATION
W91610 SE...
Similar Datasheet