DatasheetsPDF.com

1.5SMC16A Dataheets PDF



Part Number 1.5SMC16A
Manufacturers Vishay
Logo Vishay
Description Transient Voltage Suppressors
Datasheet 1.5SMC16A Datasheet1.5SMC16A Datasheet (PDF)

www.vishay.com 1.5SMC Series Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors Cathode SMC (DO-214AB) Anode (unidirectional) (bidirectional) LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models FEATURES • Low profile package Available • Ideal for automated placement • Glass passivated chip junction • Available in unidirectional and bidirectional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Availabl.

  1.5SMC16A   1.5SMC16A


Document
www.vishay.com 1.5SMC Series Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors Cathode SMC (DO-214AB) Anode (unidirectional) (bidirectional) LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models FEATURES • Low profile package Available • Ideal for automated placement • Glass passivated chip junction • Available in unidirectional and bidirectional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Available • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VWM (unidirectional) VWM (bidirectional) VBR (unidirectional) VBR (bidirectional) PPPM PD IFSM (uni-directional only) TJ max. Polarity 5.8 V to 459 V 5.8 V to 185 V 6.8 V to 540 V 6.8 V to 220 V 1500 W 6.5 W 200 A 150 °C Unidirectional, bidirectional Package SMC (DO-214AB) DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use CA suffix (e.g. 1.5SMC220CA). Electrical characteristics apply in both directions. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MECHANICAL DATA Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) Power dissipation on infinite heatsink at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal SYMBOL PPPM IPPM PD IFSM TJ, TSTG VALUE 1500 See next table 6.5 200 -65 to +150 UNIT W A W A °C Revision: 09-Jan-2024 1 Document Number: 88303 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 1.5SMC Series Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PART NUMBER DEVICE MARKING CODE UNI BI BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. MAX. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (μA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) 1.5SMC6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 143 1.5SMC7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 133 1.5SMC8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 124 1.5SMC9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 112 1.5SMC10A 10A 10C 9.50 10.5 1.0 8.55 10 103 1.5SMC11A 11A 11C 10.5 11.6 1.0 9.40 5.0 96.2 1.5SMC12A 12A 12C 11.4 12.6 1.0 10.2 5.0 89.8 1.5SMC13A 13A 13C 12.4 13.7 1.0 11.1 5.0 82.4 1.5SMC15A 15A 15C 14.3 15.8 1.0 12.8 1.0 70.8 1.5SMC16A 16A 16C 15.2 16.8 1.0 13.6 1.0 66.7 1.5SMC18A 18A 18C 17.1 18.9 1.0 15.3 1.0 59.5 1.5SMC20A 20A 20C 19.0 21.0 1.0 17.1 1.0 54.2 1.5SMC22A 22A 22C 20.9 23.1 1.0 18.8 1.0 49.0 1.5SMC24A 24A 24C 22.8 25.2 1.0 20.5 1.0 45.2 1.5SMC27A 27A 27C 25.7 28.4 1.0 23.1 1.0 40.0 1.5SMC30A 30A 30C 28.5 31.5 1.0 25.6 1.0 36.2 1.5SMC33A 33A 33C 31.4 34.7 1.0 28.2 1.0 32.8 1.5SMC36A 36A 36C 34.2 37.8 1.0 30.8 1.0 30.1 1.5SMC39A 39A 39C 37.1 41.0 1.0 33.3 1.0 27.8 1.5SMC43A 43A 43C 40.9 45.2 1.0 36.8 1.0 25.3 1.5SMC47A 47A 47C 44.7 49.4 1.0 40.2 1.0 23.1 1.5SMC51A 51A 51C 48.5 53.6 1.0 43.6 1.0 21.4 1.5SMC56A 56A 56C 53.2 58.8 1.0 47.8 1.0 19.5 1.5SMC62A 62A 62C 58.9 65.1 1.0 53.0 1.0 17.6 1.5SMC68A 68A 68C 64.6 71.4 1.0 58.1 1.0 16.3 1.5SMC75A 75A 75C 71.3 78.8 1.0 64.1 1.0 14.6 1.5SMC82A 82A 82C 77.9 86.1 1.0 70.1 1.0 13.3 1.5SMC91A 91A 91C 86.5 95.5 1.0 77.8 1.0 12.0 1.5SMC100A 100A 100C 95.0 105.


1.5SMC15A 1.5SMC16A 1.5SMC18A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)