TRANSIENT VOLTAGE SUPPRESSOR
Production specification
TRANSIENT VOLTAGE SUPPRESSOR
FEATURES
z Plastic package has Underwriters Laboratory Flammabili...
Description
Production specification
TRANSIENT VOLTAGE SUPPRESSOR
FEATURES
z Plastic package has Underwriters Laboratory Flammability Classification 94V-0
z Glass passivated junction z 400 Wsurge capability at10×1000us waveform,
Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time:Typically less then 1.0ps from 0
volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed:250℃/10
seconds at terminals.
MECHANICAL DATA
z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any
P4SMA--SERIES
Maximum Ratings and Thermal Characteristics (TA=25℃ unless otherwise noted)
Characteristic
Symbol
Value
Peak Power Dissipation at Ta=25℃,Tp=1ms (note 1)
Ppk Minimum 400
Peak Forward Surge Current,8.3ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC method) ...
Similar Datasheet