Document
SMCJ5.0(C)A THRU SMCJ440(C)A
E480232
Features
• For Surface Mount Application in Order to Optimize Board Space • Built-in Strain Relief • Glass Passivated Junction • Plastic Package Has Underwrites Laboratory Flammability • Temperature Coefficient, Typical Value is 0.1% • Fast Response Time: Typical Less than 1ps from 0V to BV Min • Typical ID Less than 1μA Above 10V • High Temperature Soldering: 260°C/10 Seconds at Terminals • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating
• Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates Compliant. See Ordering Information)
Mechanical Data
• Polarity: Color Band Denotes Positive End( Cathode) Except Bi-directional Types(Note4)
• Weight: 0.007 ounce, 0.21 gram • IEC-61000-4-2 ESD 15kV(Air), 8kV(Contact) • Standard Packaging: 16mm Tape Per ( EIA 481)
• Terminals: Solderable Per MIL-STD-750, Method 2026
Maximum Ratings
• Operating Junction Temperature Range: -55°C to +175°C • Storage Temperature Range: -55°C to +175°C • Typical Thermal Resistance Junction to Lead:RthJL=15°C/W • Typical Thermal Resistance Junction to Ambient:RthJA=75°C/W Electrical Characteristics @ 25°C Unless Otherwise Specified
Peak Pulse Power
Surge Current on
IPPM
10/1000μs Waveform
See the Table Note 2
Peak Pulse Power Dissipation on 10/1000μs Waveform
PPPM
1500W
Note 2,3,Fig1
Power Dissipationon infinite heat sink
PD
6.5W
TL = 75°C.
1500 Watt TVS 5.0 to 440 Volts
SMC (DO-214AB) (LEAD FRAME)
G
H Cathode Mark D
A E F
C B
DIMENSIONS
DIM
INCHES MIN MAX
MM MIN MAX
A 0.079 0.103 2.00 2.62
B 0.108 0.128 2.75 3.25
C 0.002 0.008 0.051 0.203
D 0.006 0.012 0.152 0.305
E 0.030 0.060 0.76 1.52
F 0.305 0.320 7.75 8.13
G 0.260 0.280 6.60 7.11
H 0.220 0.245 5.59 6.22
NOTE
Peak forward surge
current, 8.3 ms single half sine-wave
IFSM
unidirectional only
200A
Maximum
instantaneous forward voltage at 100A for
VF
3.5V MAX 1.7 TYP /5V MAX 4 TYP Note 5
unidirectional only
1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 °C per Fig.4.
3. Mounted on 8.0mm2copper pads to each terminal. 4. Unidirectional and bidirectional available,for bidirectional devices add “C”suffix to the pn#SMCJ5.0CA 5. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
SUGGESTED SOLDER PAD LAYOUT
4.83mm
3.18mm
1.78mm
Rev.3-1-01012019
1/5
MCCSEMI.COM
Electrical Characteristics @ 25°C Unless Otherwise Specified
SMCJ5.0(C)A THRU SMCJ440(C)A
MCC Part Number
Uni-Polar SMCJ5.0A SMCJ6.0A SMCJ6.5A SMCJ7.0A SMCJ7.5A SMCJ8.0A SMCJ8.5A SMCJ9.0A SMCJ10A SMCJ11A SMCJ12A SMCJ13A SMCJ14A SMCJ15A SMCJ16A SMCJ17A SMCJ18A SMCJ20A SMCJ22A SMCJ24A SMCJ26A SMCJ28A SMCJ30A SMCJ33A SMCJ36A SMCJ40A SMCJ43A SMCJ45A SMCJ48A SMCJ51A SMCJ54A SMCJ58A SMCJ60A SMCJ64A SMCJ70A SMCJ75A SMCJ78A SMCJ85A SMCJ90A SMCJ100A SMCJ110A SMCJ120A SMCJ130A SMCJ150A SMCJ160A SMCJ.