JCG1224S15

DC DC 12/15 Watts JCG Series xppower.com High Power Density 2:1 Input Range Operating Temperature 40 °C to +100 °C Single & Dual Outputs Remote On/Off 1600 VDC Isolation 3 Year Warranty Specification Input Input Voltage Range Input Current Input Filter Input Reflected Ripple Current Input Surge Undervoltage Lockout Input Reverse Voltage Protection 12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-75 VDC) See table Pi network 20 mA pk-pk through 12 µH inductor 12 V models 36 VDC for 1000 ms 24 V models 50 VDC for 1000 ms 48 V models 100 VDC for 1000 ms None None Output Output Voltage See table Minimum Load No minimum load required Initial Set Accuracy ±1.2% max for JCG12, ±1.0% for JCG15 Start Up Delay 20 ms max Line Regulation ±0.5% max Load Regulation ±0.5% max single, ±1.0% max dual Cross Regulation ±5% on dual output models (see note 2) Transient Response <3% deviation, recovery to within 1% in 250 µs for a 25% load change Ripple & Noise 85 mV pk-pk, 20 MHz bandwidth for JCG12, 60 mV pk-pk, 20 MHz bandwidth for JCG15 (see note 3) Overload Protection >150% of full load Overvoltage Protection 2.5/3.3 V models: 3.9 V typical 5 V models: 6.2 V typical 12 V models: 15.0 V typical 15 V models: 18.0 V typical ±12 V models: ±15.0 V typical ±15 V models: ±18.0 V typical Short Circuit Protection Trip & restart (hiccup) with auto recovery Maximum Capacitive See table Load Temperature Coefficient ±0.02/°C ma...