AT49F008

Features Single Voltage Operation – 5V Read – 5V Reprogramming Fast Read Access Time - 90 ns Internal Program Control and Timer 16K bytes Boot Block With Lockout Fast Erase Cycle Time - 10 seconds Byte-By-Byte Programming - 10 µs/Byte Typical Hardware Data Protection DATA Polling For End Of Program Detection Low Power Dissipation – 50 mA Active Current – 100 µA CMOS Standby Current Typical 10,000 Write Cycles Description The AT49F008 is a 5-volt-only in-system Flash Memory device. Its 8-megabits of memory is organized as 1,024,576 words by 8-bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 90 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. Pin Configurations (continued) Pin Name A0 - A19 CE OE WE RESET RDY/BUSY I/O0 - I/O7 NC Function Addresses Chip Enable Output...