IHD-1

IHD Vishay Dale Filter Inductors, High Current, Axial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Incremental Current: The typical current at which the inductance will be decreased by 5 % from its initial zero DC value Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" [6.35 mm] of the insulating sleeve edge Operating Temperature: - 55 °C to + 125 °C (no load), - 55 °C to + 85 °C (at full rated current) Current Rating: Maximum continuous operating current (DC or RMS) based on a 40 °C temperature rise FEATURES Printed circuit mounting (axial leads) Protected by polyolefin tubing High saturation bobbin used allowing high inductance with low DC resistance Pre-tinned leads High resistivity core offers very high parallel resistance, resulting in maximum coil performance 20 sleeveless models available at reduced cost Compliant to RoHS Directive 2002/95/EC MECHANICAL SPECIFICATIONS Wi...