Document
Date:- 08 Oct 2014 Data Sheet Issue:- 2
Fast Turn-off Thyristor Type P0515WC04x to P0515WC06x
Absolute Maximum Ratings
VDRM VDSM VRRM VRSM
VOLTAGE RATINGS
Repetitive peak off-state voltage, (note 1) Non-repetitive peak off-state voltage, (note 1) Repetitive peak reverse voltage, (note 1) Non-repetitive peak reverse voltage, (note 1)
MAXIMUM LIMITS 400-600 400-600 400-600 500-700
UNITS
V V V V
IT(AV) IT(AV) IT(AV) IT(RMS) IT(d.c.) ITSM ITSM2 I2t I2t
(di/dt)cr
VRGM PG(AV) PGM VGD THS Tstg
OTHER RATINGS Mean on-state current, Tsink=55°C, (note 2) Mean on-state current. Tsink=85°C, (note 2) Mean on-state current. Tsink=85°C, (note 3) Nominal RMS on-state current, Tsink=25°C, (note 2) D.C. on-state current, Tsink=25°C, (note 4) Peak non-repetitive surge tp=10ms, VRM=0.6VRRM, (note 5) Peak non-repetitive surge tp=10ms, VRM10V, (note 5) I2t capacity for fusing tp=10ms, VRM=0.6VRRM, (note 5) I2t capacity for fusing tp=10ms, VRM10V, (note 5) Maximum rate of rise of on-state current (repetitive), (Note 6) Maximum rate of rise of on-state current (non-repetitive), (Note 6) Peak reverse gate voltage Mean forward gate power Peak forward gate power Non-trigger gate voltage, (Note 7) Operating temperature range Storage temperature range
MAXIMUM LIMITS 515 334 187 1050 833 6.5 7.15 211×103 256×103 500 1000 5 1.5 60 0.25
-40 to +125 -40 to +150
UNITS A A A A A kA kA A2s A2s
A/µs A/µs
V W W V °C °C
Notes:1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C. 2) Double side cooled, single phase; 50Hz, 180° half-sinewave. 3) Single side cooled, single phase; 50Hz, 180° half-sinewave. 4) Double side cooled. 5) Half-sinewave, 125°C Tj initial.
6) VD=67% VDRM, IFG=2A, tr0.5µs, Tcase=125°C. 7) Rated VDRM.
Data Sheet. Type P0515WC04x-06x Issue 2
Page 1 of 12
October 2014
Characteristics
Fast Turn-off Thyristor P0515WC04x-06x
PARAMETER
VTM Maximum peak on-state voltage
VT0
Threshold voltage
rT
Slope resistance
(dv/dt)cr Critical rate of rise of off-state voltage
IDRM Peak off-state current
IRRM Peak reverse current
VGT Gate trigger voltage
IGT
Gate trigger current
IH
Holding current
Qra
Recovered charge, 50% Chord
tq
Turn-off time (note 2)
RthJK Thermal resistance, junction to heatsink
F
Mounting force
Wt
Weight
MIN. -
200 -
-
12
3.3 -
TYP. MAX. TEST CONDITIONS (Note 1)
-
1.39 ITM=1160A
-
0.95
-
0.377
-
- VD=80% VDRM
-
30 Rated VDRM
-
30 Rated VRRM
-
3.0 Tj=25°C
-
200 Tj=25°C
VD=10V, IT=3A
-
600 Tj=25°C
106
- ITM=300A, tp=500µs, di/dt=20A/µs, Vr=50V
-
15
ITM=800A, tp=500µs, di/dt=50A/µs, Vr=50V, Vdr=80%VDRM, dVdr/dt=20V/µs
-
20
ITM=800A, tp=500µs, di/dt=50A/µs, Vr=50V, Vdr=80%VDRM, dVdr/dt=200V/µs
-
0.095 Double side cooled
-
0.190 Single side cooled
-
5.5
70
-
UNITS V V m
V/s mA mA V mA mA µC
µs
K/W K/W kN
g
Notes:-
1) Unless otherwise indicated Tj=125°C. 2) The required tq (specified with dVdr/dt=200V/µs) is represented by an ‘x’ in the device part number. See ordering infor.