p-T-Sensor
Pressure
p-T-Sensor
Type 6188AA...
for Mold Cavity Pressure and Temperature with Front ø1 mm
Sensor for combined m...
Description
Pressure
p-T-Sensor
Type 6188AA...
for Mold Cavity Pressure and Temperature with Front ø1 mm
Sensor for combined measuring of mold cavity pressure up to 2 000 bar and contact temperature in the cavity is designed for injection molding of plastics. Design without diaphragm but with flat front.
Pressure sensor with integrated thermocouple for pressure and temperature measurement
Mounting dimensions compatible with Kistler pressure sensor Type 6183A...
Sensor cable replaceable by Kistler factory
Description The Sensor for mold cavity pressure and temperature has a front diameter of 1 mm.
The pressure acts over the entire front of the sensor and is transmitted to the crystal measuring element, which produces a proportional electric charge (pC = Picocoloumb). This is converted into a voltage 0 ... 10 V in the amplifier and is then available as an amplifier output.
The contact temperature of the melt is measured on the front of the sensor by one pair of thermocouples,...
Similar Datasheet