DatasheetsPDF.com

MS25201L-4 Dataheets PDF



Part Number MS25201L-4
Manufacturers ETC
Logo ETC
Description SWITCH / TOGGLE / TWO POLE / SEALED TOGGLE
Datasheet MS25201L-4 DatasheetMS25201L-4 Datasheet (PDF)

Downloaded from http://www.everyspec.com INCH-POUND MS25201L 15 December 2005 SUPERSEDING MS25201K 12 December 1980 DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, TWO POLE, SEALED TOGGLE This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-83731. AMSC N/A FIGURE1. Dimensions and configuration FSC 5930 Downloaded fr.

  MS25201L-4   MS25201L-4



Document
Downloaded from http://www.everyspec.com INCH-POUND MS25201L 15 December 2005 SUPERSEDING MS25201K 12 December 1980 DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, TWO POLE, SEALED TOGGLE This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-83731. AMSC N/A FIGURE1. Dimensions and configuration FSC 5930 Downloaded from http://www.everyspec.com MS25201L NOTES: 1. All Dimensions are in inches. 2. Unless otherwise specified, tolerance is ± .02 on two place decimals and ± .005 on three place decimals. 3. For hardware and terminal screw detail specifications see supplement of MIL-DTL-83731. 4. For design feature purposes, this standard takes precedence over procurement documents referenced herein REQUIREMENTS All switches on this standard are designed so that the movement of the switch mechanism is opposite .


MS25201L MS25201L-4 MS25201L-5


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)