1:6 DIFFERENTIAL CLOCK DISTRIBUTION CHIP
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
1:6 Differential Clock Distribution Chip
The MC10E/100E211 is a low skew 1:6 fano...
Description
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
1:6 Differential Clock Distribution Chip
The MC10E/100E211 is a low skew 1:6 fanout device designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal (PECL is an acronym for Positive ECL, PECL levels are ECL levels referenced to +5V rather than ground). If a single-ended input is to be used the VBB pin should be connected to the CLK input and bypassed to ground via a 0.01µF capacitor. The VBB supply is designed to act as the switching reference for the input of the E211 under single-ended input conditions, as a result this pin can only source/sink up to 0.5mA of current.
MC10E211 MC100E211
1:6 DIFFERENTIAL CLOCK DISTRIBUTION CHIP
Guaranteed Low Skew Specification Synchronous Enabling/Disabling Multiplexed Clock Inputs VBB Output for Single-Ended Use Internal 75kΩ Input Pulldown Resistors ...
Similar Datasheet