Capacitance-Digital-Converter LSI
LC717A10AJ
Capacitance‐Digital‐Converter LSI for Electrostatic Capacitive Touch Sensors
Overview The LC717A10AJ is a h...
Description
LC717A10AJ
Capacitance‐Digital‐Converter LSI for Electrostatic Capacitive Touch Sensors
Overview The LC717A10AJ is a high-performance and low-cost
capacitance-digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability.
It has 16 channels capacitance-sensor input. This makes it ideal for use in the products that need many switches. Since the calibration function and the judgment of ON/OFF are automatically performed in LSI internal, it can make development time more short. A detection result (ON/OFF) for each input can be read out by the serial interface (I2C compatible bus or SPI).
Also, measurement value of each input can be read out as 8-bit digital data. Moreover, gain and other parameters can be adjusted using serial interface.
Features
Detection System: Differential Capacitance Detection
(Mutual Capacitance Type)
Input Capacitance Resolution: Can Detect Capacitance Changes in
the Femto Farad Order
Measurement Interval (16 Differential Inputs):
♦ 30 ms (Typ) (at Initial Configuration) ♦ 6 ms (Typ) (at Minimum Interval Configuration)
External Components for Measurement: Not Required
Current Consumption:
♦ 570 mA (Typ) (VDD = 2.8 V) ♦ 1.3 mA (Typ) (VDD = 5.5 V)
Supply Voltage: 2.6 V to 5.5 V
Detection Operations: Switch Interface: I2C Compatible Bus or SPI Selectable
www.onsemi.com
SSOP30 (225 mil) CASE 565AZ
MARKING DIAGRAM
XXXXXXXXXX YMDDD
XXXXX = Specific Device Code Y = Year M = Month DDD = Additional Traceability...
Similar Datasheet