5-volt-only in-system Flash Memory
Features
• Single Voltage Operation – 5V Read
– 5V Reprogramming • Fast Read Access Time - 70 ns • Internal Program Cont...
Description
Features
Single Voltage Operation – 5V Read
– 5V Reprogramming Fast Read Access Time - 70 ns Internal Program Control and Timer 16K bytes Boot Block With Lockout Fast Erase Cycle Time - 10 seconds Byte By Byte Programming - 50 µs/Byte Hardware Data Protection DATA Polling For End Of Program Detection Low Power Dissipation
– 50 mA Active Current – 100 µA CMOS Standby Current Typical 10,000 Write Cycles
Description
The AT49F040 is a 5-volt-only in-system Flash Memory. Its 4 megabits of memory is organized as 524,288 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA.
The device contains a user-enabled “boot block” protection feature. Two versions of
the feature are available: the AT49F040 locates the boot blo...
Similar Datasheet