NCV51400

3 Amp VTT Termination Regulator DDR1, DDR2, DDR3, LPDDR3, DDR4 NCP51400, NCV51400 The NCP51400 is a source/sink Double Data Rate (DDR) termination regulator specifically designed for low input voltage and low−noise systems where space is a key consideration. The NCP51400 maintains a fast transient response and only requires a minimum output capacitance of 20 mF. The NCP51400 supports a remote sensing function and all power requirements for DDR VTT bus termination. The NCP51400 can also be used in low−power chipsets and graphics processor cores that require dynamically adjustable output voltages. The NCP51400 is available in the thermally−efficient DFN10 Exposed Pad package, and is rated both Green and Pb−free. Features For Automotive Applications Input Voltage Rails: Supports 2.5 V, 3.3 V and 5 V Rails PVCC Voltage Range: 1.1 V to 3.5 V Integrated Power MOSFETs Fast Load−Transient Response PGOOD − Logic output pin to Monitor VTT Regulation EN − Logic input pin for Shutdown mode VRI − Reference Input Allows for Flexible Input Tracking Either Directly or Through Resistor Divider Remote Sensing (VTTS) Built−in Soft Start, Under Voltage Lockout and Over Current Limit Thermal Shutdown Small, Low−Profile 10−pin, 3x3 DFN Package NCV51400MWTXG − Wettable Flank Option for Enhanced Optical Inspection NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable* These Devices ar...