NEW PRODUCT
AH372
INTERNAL PULL-UP HALL EFFECT LATCH
Description
AH372 is a single-digital-output Hall-Effect latch se...
NEW PRODUCT
AH372
INTERNAL PULL-UP HALL EFFECT LATCH
Description
AH372 is a single-digital-output Hall-Effect latch sensor with internal pull-up resistor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an output driver with a pull-up resistor. An internal band-gap
regulator provides a temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
When the magnetic flux density (B) perpendicular to the package is larger than operation point (BOP), output is switched on (OUT pin is pulled low). The output state is held on until a magnetic flux density reversal falls below BRP. When B is less than BRP, the output is switched off.
The AH372 is available in SIP-3 (Ammo Pack), SIP-3 (Bulk Pack), SC59 and SOT23 packages.
Features
Bipolar Hall Effect Latch Operation 2.2V to 20V Operating Range Single Output with Built-in Pull-up Resistor 25mA output Sink Capability -40°C to +125°C Operating Temperature Industry Standard SIP-3 (Ammo Pack), SIP-3 (Bulk Pack), SC59
and SOT23 Packages Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
(Top View)
GND 2.
3. OUT 1. VDD
SC59 and SOT23
(Front View) SIP-3 (Bulk Pack)
3. OUT 2. GND 1. VDD
Applications
Rotor Position Sensing for Motor Commu...