20W 2-channel BTL AF Power Amplifier
Ordering number : ENA1783A
LA4708N
Monolithic Linear IC
20W 2-channel BTL AF Power Amplifier for Car Stereo
http://onse...
Description
Ordering number : ENA1783A
LA4708N
Monolithic Linear IC
20W 2-channel BTL AF Power Amplifier for Car Stereo
http://onsemi.com
Overview
The LA4708N is a BTL two-channel power IC for car audio developed in pursuit of excellent sound quality. Low-region frequency characteristics have been improved through the use of a new NF capacitor-less circuit, and crosstalk which causes “muddy” sound has been reduced by improving both circuit and pattern layout. As a result, the LA4708N provides powerful bass and clear treble. In addition, the LA4708N features on-chip protectors and standby switch.
Features
High power : supports total output of 30W 30W (VCC = 13.2V, THD = 30%, RL = 4) Supports RL = 2 (PO = 30W when VCC = 13.2V, THD = 10%) Designed for excellent sound quality (fL 10Hz, fH = 130kHz) NF capacitor-less
Any on time settable by external capacitor
Less pop noise
Standby switch circuit on chip (microprocessor supported)
Various protectors on chip (output-to-ground short/output-to-VCC short/load short/overvoltage/thermal shutdown circuit)
Specifications
Maximum Ratings at Ta = 25C
Parameter
Symbol
Conditions
Maximum supply voltage
VCC max 1 No signal, t = 60s
VCC max 2
Surge supply voltage Maximum output current Allowable power dissipation
VCC surge IO peak Pd max
t 0.2s, single giant pulse Per channel Arbitrarily large heat sink
Operating temperature
Topr
Storage temperature
Tstg
* Set VCC, RL in a range that does not exceed Pd max = 37....
Similar Datasheet