GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER DIODES
VOLTAGE RANGE: 50 - 1000V
CURRENT: 1.0 A
Features
! Plastic package has Underwriters Laboratory ! Flammability Classific...
Description
VOLTAGE RANGE: 50 - 1000V
CURRENT: 1.0 A
Features
! Plastic package has Underwriters Laboratory ! Flammability Classification 94V-0 ! Low forward voltage, high current capability ! Glass passivated chip junction ! High surge capability ! Typical IR less than 0.1µA ! High temperature soldering guaranteed: ! 250°C/10 seconds, 0.375" (9.5mm) lead length, ! 5 lbs. (2.3kg) tension
Mechanical Data
! Case:Molded plastic over passivated chip ! Terminals:Plated axial leads, solderable ! per MIL-STD-750,Method 2026 ! Polarity:Color band denotes cathode end ! Mounting Position:Any ! Weight:0.0064 ounce, 0.181 gram
MPG06A - MPG06M
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER DIODES
Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
MPG MPG MPG MPG MPG SYMBOLS 06A 06B 06D 06G 06J
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=25°C
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)
VRRM 50 100 200 400 600 VRMS 35 70 140 280 420 VDC 50 100 200 400 600 I(AV) 1.0
IFSM 40.0
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current at rated DC blocking voltage
TA=25°C TA=125°C
Typical junction capacitance
(NOTE 1)
Typical reverse recovery time
(NOTE 2)
Typical thermal resist...
Similar Datasheet