ME3215-472MLB

Document 432 -1 SMT Power Inductors– ME3215 Low profile, small footprint power inductor 2.5 × 3.2 mm footprint; 1.55 mm tall Designer’s Kit C408 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations  RoHS compliant tin-silver over tin over nickel over silver. Other terminations available at additional cost. Weight  46 – 48 mg Ambient temperature  –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  2000/7″ reel; 7000/13″ reel  Plastic tape:  12 mm wide, 0.25 mm thick, 4 mm pocket spacing, 2.25 mm pocket depth PCB washing  Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. DCR SRF   Isat (A)5    I rms (A)6   Inductance2   max3   typ4 10% 20% 30% 20°C 40°C   Part number1 (µH) (Ohms) (MHz) drop drop drop rise rise ME3215-102ML_    1.0 ±20% 0.058 100 ME3215-222ML_   2.2 ±20% 0.107 64 ME3215-332ML_   3.3 ±20% 0.170 55 ME3215-472ML_   4.7 ±20% 0.245 43 ME3215-103KL_   10 ±10% 0.505 ...