S25FL128S

S25FL128S/S25FL256S 128 Mb (16 MB)/256 Mb (32 MB) 3.0V SPI Flash Memory Features ■ CMOS 3.0 Volt Core with Versatile I/O ■ SPI with Multi-I/O ❐ SPI Clock polarity and phase modes 0 and 3 ❐ DDR option ❐ Extended Addressing: 24- or 32-bit address options ❐ Serial Command set and footprint compatible with S25FL-A, S25FL-K, and S25FL-P SPI families ❐ Multi I/O Command set and footprint compatible with S25FL-P SPI family ■ READ Commands ❐ Normal, Fast, Dual, Quad, Fast DDR, Dual DDR, Quad DDR ❐ AutoBoot - power up or reset and execute a Normal or Quad read command automatically at a preselected address ❐ Common Flash Interface (CFI) data for configuration information. ■ Programming (1.5 MBps) ❐ 256 or 512 Byte Page Programming buffer options ❐ Quad-Input Page Programming (QPP) for slow clock systems ❐ Automatic ECC-internal hardware Error Correction Code generation with single bit error correction ■ Erase (0.5 to 0.65 MBps) ❐ Hybrid sector size option - physical set of thirty two 4-KB sectors at top or bottom of address space with all remaining sectors of 64 KB, for compatibility with prior generation S25FL devices ❐ Uniform sector option - always erase 256-KB blocks for software compatibility with higher density and future devices. ■ Cycling Endurance ❐ 100,000 Program-Erase Cycles, minimum ■ Data Retention ❐ 20 Year Data Retention, minimum ■ Security features ❐ OTP array of 1024 bytes ❐ Block Protection: Status Register bits to control protection against program or erase of ...