Shielded Power Inductors
Document 779-1
Shielded PowerInductors–XFL2005
• Lowest profile, ultra-miniature, magnetically shielded power inductor...
Description
Document 779-1
Shielded PowerInductors–XFL2005
Lowest profile, ultra-miniature, magnetically shielded power inductor; only 0.5 mm high, 2 mm × 2 mm footprint
Soft saturation Designer’s Kit C434 contains 5 of each value and 5 of each XFL2006 Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available. Weight 8.4 mg Ambient temperature –40°C to +855°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°CResistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2 ±20% (µH)
XFL2005-151ME_ 0.15 XFL2005-221ME_ 0.22 XFL2005-331ME_ 0.33 XFL2005-471ME_ 0.47 XFL2005-681ME_ 0.68
DCR (Ohms)3 nom max
...
Similar Datasheet