DatasheetsPDF.com

XFL4030-302ME Dataheets PDF



Part Number XFL4030-302ME
Manufacturers Coilcraft
Logo Coilcraft
Description Shielded Power Inductors
Datasheet XFL4030-302ME DatasheetXFL4030-302ME Datasheet (PDF)

Document 1048-1 Shielded Power Inductors – XFL4030 • High current – up to 5.2 A • Very low DCR – as low as 3.6 mOhms Core material Composite Environmental  RoHS compliant, halogen free Terminations  RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight  0.25 – 0.27 g Ambient temperature  –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature  +165°C (ambient + temp rise). Storage temperature  Component: –40°C to +165°C. Tape and reel p.

  XFL4030-302ME   XFL4030-302ME


Document
Document 1048-1 Shielded Power Inductors – XFL4030 • High current – up to 5.2 A • Very low DCR – as low as 3.6 mOhms Core material Composite Environmental  RoHS compliant, halogen free Terminations  RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight  0.25 – 0.27 g Ambient temperature  –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature  +165°C (ambient + temp rise). Storage temperature  Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  500/7″ reel; 2000/13″ reel  Plastic tape:  12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth PCB washing  Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf   Inductance2   Part number1 ±20% (µH) XFL4030-471ME_ 0.47 XFL4030-102ME_ 1.0 XFL4030-202ME_ 2.0 XFL4030-302ME_ 3.0 XFL4030-472ME_ 4.7   DCR (mOhms)3 typ     max SRF typ4 (MHz)   Isat (A)5 10% drop 20% drop 30% drop   Irms (A)6 20°C rise  40°C rise 3.6 4.4 110 5.5 6.6 67 9.5 11.5 46 17.0 20.5 39 25.0 30.0 34 4.5 4.9 3.6 3.9 2.5 2.8 1.8 2.1 1.7 2.0 5.2 4.1 3.0 2.2 2.1 14.0 18.0 11.0 14.5 7.80 11.8 6.10 8.00 5.70 7.50 1. When ordering, please specify packaging code: XFL4030-472MEC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2000 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 1048-1  Revised 02/15/16 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Inductance (µH) Inductance (µH) Document 1048-2 Shielded Power Inductors – XFL4030 Typical L vs Current 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.47 µH 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Current (A) 1.6 1.2 1.0 µH 0.8 Inductance (µH) Typical L vs Frequency 100 10 4.7 µH 3.0 µH 2.0 µH 1 1.0 µH 0.47 µH 0.4 0 0 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 4 3 2 1 0 0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Current (A) 2.0 µH 0.5 1.0 1.5 2.0 2.5 3.0 Current (A) 3.0 µH 0.25 0.50 0.75 1.0 0.2.5 1.50 1.75 2.0 2.25 Current (A) 4.7 µH 0.25 0.50 0.75 1.0 0.2.5 1.50 1.75 2.0 2.25 Current (A) 0.1 0.1 0.157 ±0.012 4,0 ±0,3 1 10 Frequency (MHz) 100 XXX Dash number 0.157 ±0.012 4,0 ±0,3 0.122 3,10 max 0.032 ±0.002 0,82 ±0,05 0.128 ±0.008 3,26 ±0,20 0.062 ±0.010 1,57 ±0,25 Dimensions are in inches mm Recommended Land Pattern 0.093 2,37 0.134 3,4 0.038 0,98 Inductance (µH) Inductance (µH) Inductance (µH) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 1048-2  Revised 02/15/16 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. .


XFL4030-202ME XFL4030-302ME XFL4030-472ME


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)