LED Lamp
Semiconductor
Features
• φ3mm(T-1) all plastic mold type • Available on tape and reel
SM3317-L / SM3317-L(B)
LED Lamp
...
Description
Semiconductor
Features
φ3mm(T-1) all plastic mold type Available on tape and reel
SM3317-L / SM3317-L(B)
LED Lamp
Outline Dimensions
unit : mm
STRAIGHT TYPE
2.80~3.20
STOPPER TYPE : (B)
2.80~3.20
0.7 0 M a x.
5.1 0 ~ 5.5 0 2.7 0 ~ 3.1 0
1.2 0 M in.
2 3.0 0 M in.
5.1 0 ~ 5.5 0 2.7 0 ~ 3.1 0
4.7 0 ~ 5.7 0
2 3.0 0 M in. 0.7 0 M a x.
1.2 7 Typ.
0.4 5 M a x.
1.0 0 M in. 2.5 4 Ty p.
1.0 0 M in. 2.5 4 Typ.
12
3.6 0 ~ 4.0 0
0.4 5 M a x.
3.5 0 ~ 3.9 0
12
3.6 0 ~ 4.0 0
KSD-O2B046-000
3.5 0 ~ 3.9 0
PIN Connections 1. Anode 2. Cathode
1
SM3317-L / SM3317-L(B)
Absolute Maximum Ratings
Characteristic
Symbol
Rating
Power dissipation Forward current *1Peak forward current
PD IF IFP
75 30 50
Reverse voltage VR 4
Operating temperature range
Topr
-25∼85
Storage temperature range
Tstg
-30∼100
*2Soldering temperature
Tsol
260℃ for 10 seconds
*1.Duty ratio = 1/16, Pulse width = 0.1ms
*2.Keep the distance more than 2.0mm from PCB to the bottom of LED package
(Ta=25℃)
Unit
mW mA mA V ℃ ℃
Electrical / Optical Characteristics
Characteristic
Symbol Test Condition
(Ta=25℃)
Min Typ Max Unit
Forward voltage *4Luminous intensity
VF
IF= 20mA
- 2.1
IV
IF= 20mA
100 -
Dominant wavelength Spectrum bandwidth
λD
IF= 20mA
561 566
∆λ IF= 20mA - 30
Reverse current *3Half angle
IR θ1/2
VR=4V IF= 20mA
-- ±22
*4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
2.5 350 570
10 -
V mcd nm nm uA deg
*3. Luminous intensity m...
Similar Datasheet