Cascadable Amplifier
A4011 / SMA4011
Cascadable Amplifier 1000 to 4000 MHz
Rev. V3
Features
LOW NOISE FIGURE: 2.0 dB (TYP.) MEDIUM OUT...
Description
A4011 / SMA4011
Cascadable Amplifier 1000 to 4000 MHz
Rev. V3
Features
LOW NOISE FIGURE: 2.0 dB (TYP.) MEDIUM OUTPUT POWER: +18.3 dBm (TYP.) HIGH EFFICIENCY: 65 mA (TYP.) @ +5 Vdc PHEMT AMPLIFIER
Product Image
Description
The A4011 microwave amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage PHEMT feedback amplifier design displays impressive performance characteristics over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number A4011
SMA4011 CA4011 **
Package TO-8
Surface Mount SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50, VCC = +5 VDC
Absolute Maximum Ratings
Parameter
Frequency Small Signal Gain (min)
Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output
@ 1 dB comp. (min)
Units
GHz dB
Typical 25ºC 0.8-4.5 15.5
dB ±0.4
dB 16
dB 2.0
dBm
18.3
Guaranteed
0º to 50ºC -54º to +85ºC*
1.0-4.0
1.0-4.0
13.0 12.5
±0.7 ±1.0
2.7 16.5
3.2 16.0
Parameter
Absolute Maximum
Storage Temperature -62ºC to +150ºC
Case Temperature
+125ºC
DC Voltage
+7 V
Continuous Input Power
+13 dBm
Short Term Input power (1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.25 W
“S” Series Burn-In Temperature (case)
+125ºC
IP3
dBm
+29
IP2
dBm
+45
Second Order Harmoni...
Similar Datasheet