Document
PRELIMINARY
.047(1.20)
MS14~MS120
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE 40 to 200 Volts CURRENT 1.0 Amperes
FEATURES
• Plastic package has Underwriters Laboratory Flammability Classification 94V-O
• For surface mounted applications • Low profile package • Built-in strain relief • Metal to silicon rectifier. majority carrier conduction • Low power loss,high efficiency • High surge capacity • High current capacity ,low VF • For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications. • In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: JEDEC DO-214AC molded plastic • Terminals:Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes positive end (cathode) • Standard packaging: 12mm tape (EIA-481) • Weight: 0.0023 ounce, 0.0679 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
PARAMETER
S YMB OL MS 14 MS 14A MS 15 MS 16 MS 18 MS 19 MS 110 MS 115 MS 120 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM 40 45 50 60 80 90 100 150 200 V
Maximum RMS Voltage
VRMS
28 31.5 35 42 56 63 70 105 140 V
Maximum DC Blocking Voltage
VDC 40 45 50 60 80 90 100 150 200 V
Maximum Average Forward Current (See Figure 1)
Peak Forward Surge Current :8.3ms single half sine-wave superimposed on rated load(JEDEC method)
IF ( A V ) IF S M
1.0 30
A A
Maximum Forward Voltage at 1.0A ( Note 1) Maximum DC Reverse Current TJ=25OC at Rated DC Blocking Voltage TJ=100OC Typ i c a l The rma l Re s i s ta nc e (No te 2 )
Op e ra ti ng J unc ti o n a nd S to ra g e Te mp e ra ture Ra ng e
V 0.7 F
IR RθJ L RθJ A TJ,TS TG -55 to +150
0.74
0.80
0.05 20 30 95
-65 to +175
0.9 V
mA OC /
W OC
NOTES: 1.Pulse Test with PW =300µsec, 1% Duty Cycle. 2.Mounted on P.C. Board with 5.0mm2 (.013mm thick) copper pad areas.
STAD-APR.22.2009
PAGE . 1
PRELIMINARY
MS14~MS120
AVERAGE FORWARD RECTIFIED CURRENT AMPERES
RATING AND CHARACTERISTIC CURVES
1.0 = 40V = 45-200V
.75
.50
.25
S I N G L EP H A S EH A L FWAV E6 0 H z R E S I S T I V EO RI N D U C T I V EL O A D P.C.B MOUNTED ON 0.2 X 0.2"( 5.0 X 5. 0mm) C O P P E RPA DA R E A S
0 0 25 50 75 100
125
150
LEAD TEMPERATURE, oC
175
Fig.1-FORWARD CURRENT DERATING CURVE
REVERSE CURRENT ,m A
105
104
103 TJ=125OC
102 TJ=75OC
101
100
10-1
TJ=25OC
VRRM =40-60V VRRM =80-200V
10-2 20 40 60 80 100
PERCENT OF RATED PEAK REVERSE VOLTAGE ,%
Fig.3-TYPICAL REVERSE CHARACTERISTIC
FORWARD CURRENT, AMPERES
PEAK FORWARD SURGE CURRENT, AMPERES
30 25
20 15 10
5 0
1 10 100 NO. OF CYCLE AT 60Hz
Fig.2- MAXIMUM NON-REPETITIVEPEAKFORWARD SURGE CURRENT
10
40 - 45 V
1.0
80-100V
0.1
50-60V 15 0-200V
TA = 25OC
0.01 0.2
0.4 0.6
0.8 1.0
FORWARD VOLTAGE, VOLTS
1.2
Fig.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC
STAD-APR.22.2009
PAGE . 2
MS14~MS120
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8Kper 7” plastic Reel
LEGAL STATEMENT
Copyright PanJit International, Inc 2009
The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others.
STAD-APR.22.2009
PAGE . 3
.