MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email:
[email protected] Web: www.mdesemiconductor.com
SMLJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 3000 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to optimize board space
• Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01% • Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1µA above 10V • High temperature soldering:
250°C/10 seconds at terminals • Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
DO-214AB (SMC J-Bend)
Cathode Band
0.126 (3.20) 0.114 (2.90)
0.245 (6.22) 0.220 (5.59)
0.103 (2.62) 0.079 (2.06)
0.280 (7.11) 0.260 (6.60)
0.012 (0.305) 0.006 (0.152)
0.060 (1.52) 0.030 (0.76)
0.008 (0.203) MAX.
0.320 (8.13) 0.305 (7.75)
Dimensions in inches and(millimeters)
Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional Standard Packaging: 12mm tape (EIA STD RS-481) Weight: 0.007 ounces, 0.21 grams)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SMLJ5.0 thru types SMLJ170 (e.g. SMLJ5.0C, SMLJ170CA) Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, 2, Fig.1)
PPPM
Minimum 3000
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
IPPM SEE TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
IFSM
300
Operatings and Storage Temperature Range NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 8.0mm x 8.0mm (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS Watts Amps Amps
°C
Certified RoHS Compliant UL File # E223026
11/13/2013
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email:
[email protected] Web: www.mdesemiconductor.com
RATING AND CHARACTERISTIC CURVES SMLJ SERIES
FF
N Fig. 1 - Peak Pulse Power Rating Curve
o 1000 n Non-repetitive pulse
waveform shown in Fig.3 TA = 25°C
100
PPPM-Peak Pulse Power (kW)
10
1
10T
t 0.1
0.0000001
.000001
0.00001
td - Pulse Width (sec.)
0.0001m
0.001m
Fig.3 - Pulse Waveform
150
tr = 10μsec.
TJ = 25°C Pulse Width(td)is defined
Peak Value IPPM 100
as the point where the peak current decays to 50% of IPPM
Half Value- IPPM 2
Peak Pulse Power (PPP) or Current (IPP)
Derating in
100 87.5
75 62.5
50 37.5
25 12.5
0 0
Fig.2 - Pulse Derating
25 50 75 100 125 150 175 200
TA - Ambient Temperature
1000000
Fig. 4 - Typical Junction Capacitance
10000
Bi-directional V=OV
Uni-directional @VR
Uni-directional V=OV
CJ - Capacitance (pF)
IPPM - Peak Pulse Current,% IRSM
100
50 10/1000μsec.Waveform as defined by R.E.A.
Bi-directional @VR
td
0 0
1.0
1
1
2.03.0
3.0 4.0
4.0
F t - Time(ms)
10 100
VWM - Reverse Stand-Off
1000
Fig. 5 - Steady State Power Derating Curve
Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only
8 8.0
350
. 7.0
60Hz Resistive or Inductive Load
300
8.3ms Single Half Sine-Wave (JEDEC Method)TJ=TJ max.
6.0
5.0 250
PM(AV),Steady State Power Dissipation (W)
4.0 200
3.0 2.0 150
1.0 100
IFSM-Peak Forward Surge
00
N10 t
TL - Lead Temperature (°C)
50 1
10 100
Number of Cycles at 60 Hz
11/13/2013
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email:
[email protected] Web: www.mdesemiconductor.com
3000 Watt Surface Mount TVS
DEVICE REVERSE BREAKDOWN BREAKDOWN TEST
UNI-POLAR BI-POLAR
MARKING CODE
UNI BI
STANDOFF VOLTAGE VRWM (V)
VOLTAGE VBR (V)
MIN. @ IT
VOLTAGE VBR (V)
MAX. @ IT
CURRENT (IT) mA
SMLJ5.0A SMLJ5.0CA RDE DDE 5.00
6.40
7.00
10
SMLJ6.0A SMLJ6.0CA RDG DDG 6.00
6.67
7.37
10
SMLJ6.5A SMLJ6.5CA RDK DDK 6.50
7.22
7.98
10
SMLJ7.0A SMLJ7.0CA PDM DDM 7.00
7.78
8.60
10
SMLJ7.5A SMLJ7.5CA PDP DDP 7.50
8.33
9.21
1
SMLJ8.0A SMLJ8.0CA PDR DDR 8.00
8.89
9.83
1
SMLJ8.5A SMLJ8.5CA PDT DDT 8.50
9.44
10.40
1
SMLJ9.0A SMLJ9.0CA PDV DDV 9.00
10.00
11.10
1
SMLJ10A SMLJ10CA PDX DDX 10.00
11.10
12.30
1
SMLJ11A SMLJ11CA PDZ DDZ 11.00
12.20
13.50
1
SMLJ12A SMLJ12CA PEE DEE 12.00
13.30
14.70
1
SMLJ13A SMLJ13CA PEG DEG 13.00
14.