Document
SCT12N60FD
Triac
600V, 12A STANDARD TRIAC
This device is suitable for low power AC switching application, phase control application such as fan speed and temperature modulation control, lighting control and static switching relay.
Features
y Repetitive Peak Off-State Voltage : VDRM=600V y R.M.S On-State Current : IT(RMS)=12A y Gate trigger current : IGT=40mA max (Mode Ⅰ-Ⅱ-Ⅲ) y High Commutation: (dI/dt)C = 6.0A/㎳(Min)
Applications
y Switching mode power supply, light dimmet y TV sets, stereo, refrigerator, washing machine y Electric blanket, solenoid driver, small motor control y Photo copier, electric tool
123
TO-220F-3L
Product Characteristics
Symbol
Rating
IT(RMS) VDRM
12A 600V
Marking Diagram
Ordering Information
Device
Marking Code
Package
SCT12N60FD SCT12N60 TO-220F-3L
Packaging
50 Units / Tube
Column 1 : Manufacture Logo Column 2 : Production Information
- △ : Factory Management Code
- YMDD : Date Code(Year, Month, Date) Column 3 : Device code
Absolute Maximum Ratings (Limiting Values)
Characteristic Repetitive Peak Off-state Voltage RMS on-state current (full sine wave) Non- repetitive surge peak on-state current (full cycle, Tj initial = 25℃) I2t Value for fusing Peak gate current Peak gate power dissipation Average gate peak dissipation Storage temperature range Operating junction temperature range
Symbol VDRM IT(RMS)
ITSM
I2t IGM PGM PG(AV) Tstg Tj
Value 600 12
126
78 4 5 1 -40 to +150 -40 to +125
Unit V A
A
A2s A W W ℃ ℃
KSD-S0O001-000
1
Thermal Characteristics
Characteristic Maximum thermal resistance junction to case (AC) Maximum thermal resistance junction to ambient (AC)
SCT12N60FD
Symbol
Rth(j-c) Rth(j-a)
Value
4.0 60
Unit
℃/W ℃/W
Electrical Characteristics (TJ=25℃, unless otherwise specified)
Off Characteristics
Characteristic
Symbol
Test Condition
Repetitive peak Off-state current Repetitive peak reverse current On Characteristics
IDRM IRRM
VD = VDRM VR = VRRM
Characteristic
Symbol
Test Condition
Peak On-state voltage Holding current
Gate trigger current
Gate trigger voltage Gate Non-trigger voltage Dynamic Characteristics
VTM IH IGT (Ⅰ-Ⅱ-Ⅲ) IGT (Ⅳ) VGT (Ⅰ-Ⅱ-Ⅲ) VGD
IT = 17A VD = 12V, IT = 0.2A VD = 12V, RL = 30Ω VD = 12V, RL = 30Ω VD = 2/3 VDRM, Tj=125℃
Characteristic
Critical rate of rise of Off-state Voltage Rate of Change of Commutation Current
Critical rate of rise of on-state current
Symbol (dV/dt)S (dI/dt)C
dI/dt
Test Condition
VD = 2/3 VDRM, Tj=125℃
(dV/dt)C=10V/㎲↓, Tj=125℃ f=120hz, IG = 2×IGT tr≤100 ㎱, Tj=125℃
Min. -
Min. -
0.2
Min. 2000
6.0
-
Typ. -
Typ. -
Typ. -
-
Max. 5 5
Max. 1.55 60 40
1.3
-
Max. -
50
Unit uA μA
Unit V mA mA mA V V
Unit V/ μS A/㎳
A/ μS
Simple circuit for (dV/dt)S
Simple circuit for (dI/dt)C vs (dV/dt)C
Simple circuit for dI/dt
KSD-S0O001-000
2
Electrical Characteristic Curves
Fig. 1 P – IT(RMS)
SCT12N60FD
Fig. 2 IT(RMS) – TC
㎃A W
㎳A
Fig. 3 IT - VT
Fig. 4 (dI/dt)C - (dV/dt)C
Fig. 5 IGT- Tj
Fig. 6 IT - IGT
㎲
KSD-S0O001-000
㎃
3
㎃ ㎃
Electrical Characteristic Curves
Fig. 7 VGT- Tj
SCT12N60FD
Fig. 8 IT - VGT
Fig. 9 IH- VT
KSD-S0O001-000
4
Package Outline Dimensions
SCT12N60FD
KSD-S0O001-000
5
SCT12N60FD
The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-S0O001-000
6
.