ALN0070

plerowTM ALN0070 Internally Matched LNA Module C o u pl er C o u pl er Features · S21 = 35.8 dB@65 MHz = 36.2 dB@75 MHz · NF of 0.9 dB over Frequency · Unconditionally Stable · Single 5 V Supply · High OIP3@Low Current Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications (in Production) Typ.@T = 25 C, Vs = 5 V, Freq. = 70 MHz, Zo.sys = 50 ohms Parameter Specifications Unit Min Typ Max Frequency Range MHz 65 75 Gain dB 35 36 Gain Flatness dB 0.2 0.3 Noise Figure dB 0.9 0.95 Output IP3 dBm 36 37 S11/S22 dB -18/-18 Output P1dB dBm 19 20 Switching Time (3) sec - Supply Current mA 150 170 Supply Voltage V 5 Impedance  50 Max. RF Input Power dBm C.W 23~25 (before fail) Package Type ...