Digital Attenuator
MAAD-009260
Constant Phase Digital Attenuator 32 dB, 2-Bit, TTL Driver, DC - 3.0 GHz
Features
Attenuation: Two 16 dB b...
Description
MAAD-009260
Constant Phase Digital Attenuator 32 dB, 2-Bit, TTL Driver, DC - 3.0 GHz
Features
Attenuation: Two 16 dB bits Minimal Phase Variation over Attenuation Range Low DC Power Consumption Hermetic Surface Mount Package Integral TTL Driver 50 Ohm Nominal Impedance 260°C Reflow Compatible RoHS* Compliant
Description
MACOM’s MAAD-009260-000100 is a GaAs FET 2-bit digital attenuator with two 16 dB steps and 32 dB total attenuation. The design has been optimized to minimize phase variation over the attenuation range. This attenuator and integral TTL driver is in a hermetically sealed ceramic 16-lead surface mount package.
The MAAD-009260-000100 is ideally suited for use where accuracy, fast switching, very low power consumption and low intermodulation products are required.
Typical applications include dynamic range setting in precision receiver circuits and other gain/leveling control circuits. Environmental screening is available. Contact the factory for information.
Ordering Information
Part Number MAAD-009260-000100 MAAD-009260-0001TB
Package Bulk Packaging Sample Test Board
Note: Reference Application Note M513 for reel size information.
Functional Schematic
Rev. V2
Pin Configuration 1
Pin No. 1 2 3 4 5 6 7 8
Function RF1 GND GND GND GND GND GND RF2
Pin No. 9 10 11 12 13 14 15 16
Function GND +5V -5V GND C2 C1 GND GND
1. The metal bottom of the case must be connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union...
Similar Datasheet