Document
RB551V-30
SMALL SIGNAL DIODE
VOLTAGE RANGE 30 Volts CURRENT 500 mAmperes
FEATURES
* High current rectifier Schottky diode * Low voltage ,low inductance * For power supply
MECHANICAL DATA
* Case: Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.004 grams
.014(.35) .010(.25)
SOD-323
.071(1.80) .063(1.60)
.106(2.70) .098(2.50)
.055(1.40) .047(1.20)
.006(.15) .003(.08)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25OC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
MAXIMUM RATINGS (@TA=25OC unless otherwise noted) RATINGS
Non-Repetitive Peak Reverse Voltage Maximum DC Reverse Voltage Maximum Average Forward Rectified Current Non-Repetitive Peak Forward Surge Current Operating and Storage Temperature Range
SYMBOL VRM VR IO IFSM
TJ,TSTG
ELECTRICAL CHARACTERISTICS (@TA=25OC unless otherwise noted)
PARAMETER
CONDITIONS
SYMBOL
Maximum Instantaneous Forward Voltage
@IF=100mA @IF=500mA
VF
Maximum Instantancous Reverse Current
@VR=20V
IR
REF .019(0.46)
MAX.039(1.00)
.004(.10) .000(.00)
Dimensions in inches and (millimeters)
RB551V-30 30 20 0.5 2
-40~+125
RB551V-30 0.36 0.47 100
UNITS Volts Volts Amps Amps OC
UNITS
Volts uA VC 2006-3
IF(A)
RATING AND CHARACTERISTICS CURVES ( RB551V-30 )
10A
1A
100m 10m 1m
125OC 75OC
25OC -25OC
100m 0
0.1 0.2 0.3 0.4
VF(V)
Figure1 Forward Characteristics
1000 TJ=25OC
0.5
IR(A)
100m 10m 1m 100u 10u
1u 100n
0
1.0
IO(A)
100 0.5
10
125OC 75OC 25OC
-25OC
10 20 30
VR(V)
Figure2 Reverse Characteristics
40
CT(pF)
00
0 10 20 30 40
0 25 50 75 100 125 150
VR(V)
Figure3 Capacitance between terminals characteristics
Ta(OC)
Figure4 Derating curve
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
.