500mA Buck/Boost Charge Pump LED Driver
SGM3140 500mA Buck/Boost Charge Pump LED Driver
GENERAL DESCRIPTION
The SGM3140 is a current-regulated charge pump idea...
Description
SGM3140 500mA Buck/Boost Charge Pump LED Driver
GENERAL DESCRIPTION
The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for Flash and Torch modes.
The SGM3140 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. It switches at 2.2MHz, allowing the use of tiny components. The supply voltage ranges from 2.7V to 5.5V and is ideally suited for all applications powered by a single Li-ion battery cell or three to four NiCd, NiMH, or Alkaline battery cells.
The SGM3140 also features a very low shutdown current, an automatic soft-start mode to limit inrush current, as well as over-current, over-voltage and over-temperature thermal shutdown control.
A low current-sense reference voltage (47mV) allows the use of small 0603 current sensing resistors.
The SGM3140 is available in Green TDFN-3×3-10L package and is specified over an ambient temperature range of -40℃ to +85℃.
APPLICATIONS
White LED Torch, Flash for Cell Phones, DSCs and Camcorders White LED Backlighting Generic Lighting, Flash and Strobe Applications General Purpose High Current Boost
FEATURES
● Output Current Up to 500mA ● Up to 90% Efficiency in Torch Mode ● Adjustable Flash Mode Current ● Automatic Buck/Boost Mode Switchover ● Input Voltage Range: 2.7V to 5.5V ● Minimum External Components: No Inductors ● High Frequency Operati...
Similar Datasheet