S6E1A11B0A

S6E1A Series 32-bit Arm® Cortex®-M0+ FM0+ Microcontroller The S6E1A Series is a series of highly integrated 32-bit microcontrollers designed for embedded controllers aiming at low power consumption and low cost. This series has the Arm Cortex-M0+ Processor with on-chip Flash memory and SRAM, and consists of peripheral functions such as various timers, ADCs and communication interfaces (UART, CSIO, I2C, LIN). The products which are described in this data sheet are placed into TYPE1-M0+ product categories in "FM0+ Family PERIPHERAL MANUAL". Features 32-bit Arm Cortex-M0+ Core Processor version: r0p1 Maximum operating frequency: 40 MHz Nested Vectored Interrupt Controller (NVIC): 1 NMI (non-maskable interrupt) and 32 peripheral interrupt with 4 selectable interrupt priority levels 24-bit System timer (Sys Tick): System timer for OS task management Bit Band operation Compatible with Cortex-M3 bit band operation On-Chip Memories Flash memory  Up to 88 Kbyte  Read cycle:0 wait-cycle  Security function for code protection SRAM The on-chip SRAM of this series has one independent SRAM.  SRAM: 6 Kbyte CSIO  Full duplex double buffer  Built-in dedicated baud rate generator  Overrun error detection function  Serial chip select function (ch.1 and ch.3 only)  Data length: 5 to 16 bits LIN  LIN protocol Rev.2.1 supported  Full duplex double buffer  Master/Slave mode supported  LIN break field generation function (The length is variable between 13 bits and 16 bits.) ...