Document | DataSheet (486.84KB) |
The NJW4828-A is 8-channel sink driver with 600mA output. The input circuits have built-in flip-flops, and they can latch the input data signals by using the LP signal as trigger. The CLRb input has built-in filter for noise immunity. Supply voltage and input voltage correspond to 5V logic, maximum .
●8-channel Parallel Input Parallel Output
●Built-in Flip-Flops for latching Input data
●Supply Voltage
●Output Voltage
VDD=4.0 to 5.5V VDS=up to 40V (45V Rating)
●Output Current
300mA(DC) / ch.
600mA(Peak) / ch.
●Built-in Noise Filter (CLRb Pin)
●Protection Circuit
OCP, TSD
●Output Slew Rate Control
●Operating Temperature
Topr=-40 to 125°C
●Package Outline
SDIP22
■GENERAL DESCRIPTION
The NJW4828-A is 8-channel sink driver with 600mA output. The input circuits have built-in flip-flops, and they can latch the input data signals by using the LP signal as trigger. The CLRb input ha.
Distributor | Stock | Price | Buy |
---|
No. | Part # | Manufacture | Description | Datasheet |
---|---|---|---|---|
1 | NJW4820 |
New Japan Radio |
35V / 500mA Low Side Switch | |
2 | NJW4822 |
JRC |
1-Channel Low Side Switch | |
3 | NJW4800 |
New Japan Radio |
30V/4A Half Bridge Driver | |
4 | NJW4801 |
New Japan Radio |
Small PKG Half Bridge Driver | |
5 | NJW4810 |
New Japan Radio |
35V / 1A H-Bridge Driver | |
6 | NJW4810A |
New Japan Radio |
Dual Half Bridge Driver | |
7 | NJW4813 |
New Japan Radio |
Dual Half Bridge Driver | |
8 | NJW4814 |
New Japan Radio |
Dual H-Bridge Driver | |
9 | NJW4830 |
New Japan Radio |
Single High Side Switch | |
10 | NJW4832 |
New Japan Radio |
1-channel High Side Switch | |
11 | NJW4840 |
New Japan Radio |
High Speed Switching Gate Driver | |
12 | NJW4841 |
New Japan Radio |
1-channel Switching Gate Driver | |
13 | NJW4841-T1 |
New Japan Radio |
1-channel Switching Gate Driver | |
14 | NJW4100 |
New Japan Radio |
Lithium-ion Battery Charger Controller IC | |
15 | NJW4107 |
New Japan Radio |
LDO |