DatasheetsPDF.com

XR77103

MaxLinear
Part Number XR77103
Manufacturer MaxLinear
Description Universal PMIC 3-Output Programmable Buck Regulator
Published Sep 1, 2018
Detailed Description XR77103 Universal PMIC 3-Output Programmable Buck Regulator Description The XR77103 features three high efficiency, wid...
Datasheet PDF File XR77103 PDF File

XR77103
XR77103


Overview
XR77103 Universal PMIC 3-Output Programmable Buck Regulator Description The XR77103 features three high efficiency, wide input range, synchronous buck converters.
Each converter is digitally programmable requiring minimal external components, thus providing the smallest size solution possible.
The converters can operate in 5V, 9V, and 12V systems and have integrated power switches.
The output voltage of each converter can be adjusted by programming the values in the VOUT setting registers through the I2C interface.
The adjustable range is 0.
8V to 6V with 50mV resolution.
The output voltage also can be set externally using an external resistor divider.
The output sequence among the outputs, soft-start time, and the peak inductor current limit are also set through I2C.
The switching frequency of the converters can either be set with I2C or can be synchronized to an external clock connected to SYNC pin if needed.
The switching regulators are designed to operate from 440kHz to 2.
3MHz.
Each converter operates in phase or out-of-phase according to the value in the phase setting register.
This can minimize the input filter requirements.
XR77103 features a supervisor circuit that monitors each converter output.
The PGOOD pin is asserted once sequencing is done, all outputs are reported in regulation, and the reset timer expires.
The polarity of the signal is active high.
XR77103 also features a light load pulse skipping mode (PSM).
It is set through I2C.
The PSM mode allows for a reduction on the input power supplied to the system when the host processor is in stand-by (low activity) mode.
FEATURES ■■ 4.
5V to 14V wide input supply voltage range ■■ Built-In MOSFET and synchronous rectifier ■■ I2C programmable supplies Output voltage (0.
8V to 6V) Power on sequence Soft-start timing Switching frequency (440kHz to 2.
3MHz) Individual current limit Optional power saving mode at light loads ■■ Non volatile memory (NVM) with up to 10,000 times write operation ■■ High accuracy 0.
8...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)