LIQUID CRYSTAL DISPLAY
Description
AZ DISPLAYS
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
CUSTOMER APPROVAL
※ PART NO.
: ATM0430D19A (AZ DISPLAYS) VER3.
0
APPROVAL
COMPANY CHOP
SKYDROP
CUSTOMER COMMENTS
AZ DISPLAYS ENGINEERING APPROVAL
DESIGNED BY
CHECKED BY
APPROVED BY
SUNHB
ATM0430D19A(AZ DISPLAYS) TFT MODULE V4.
0
REVISION RECORD
REVISION REVISION DATE
PAGE
CONTENTS
VER1.
0 2014-03-17
FIRST ISSUE
VER2.
0 2014-09-22
4 CHANGE PIN DEFINITION
5 CHANGE BACKLIGHT DRIVING CIRCUIT
13 CHANGE FPC SIZE
VER3.
0 2014-09-25
13 CHANGE BEZEL SIZE
VER4.
0 2014-11-12
CHANGE FPC RESISTOR R2=NC
AND R11=0ohm
AZ DISPLAYS
1
ATM0430D19A(AZ DISPLAYS) TFT MODULE V4.
0
※ CONTENTS
1.
GENERAL SPECIFICATIONS 2.
PIN ASSIGNMENT 3.
OPERATING SPECIFICATIONS 4.
OPTICAL SPECIFICATIONS 5.
RELIABILITY TEST 6.
PRECAUTION FOR USING LCM 7.
MECHANICAL DRAWING 8.
PACKAGE DRAWING 9.
INSPECTION SPECIFICATION
AZ DISPLAYS
2
ATM0430D19A(AZ DISPLAYS) TFT MODULE V4.
0
1.
GENERAL SPECIFICATIONS
Item 1.
LCD size 2.
Driver element 3.
Resolution 4.
Display mode 5.
Dot Pitch (W*H) 6.
Pixel pitch(W*H) 7.
Active Area(W*H) 8.
Module size (W*H) 9.
Surface treatment 10.
Color arrangement 11.
Color 12.
Interface 13.
Weight 14.
RoHS
Specification 4.
3 inch(Diagonal) a-Si TFT active matrix 480x(RGB)x272 Normally white , Transmissive 0.
0660mm(W) x 0.
1980mm(H) 0.
1980mm(W) x 0.
1980mm(H) 95.
04mm(W) x 53.
856mm(H) 105.
5mm(W) x 67.
2mm(H) x 2.
9mm(D) Anti-glare RGB-stripe 16.
7M 24bit RGB interface 44g(Typ.
) ROHS compliant
Remark Note 1
Note 1: Please refer to mechanical drawing.
AZ DISPLAYS
3
ATM0430D19A(AZ DISPLAYS) TFT MODULE V4.
0
2.
PIN ASSIGNMENT
TFT LCD Panel Driving Section FPC Connector is used for the module electronics interface.
The recommended model is
“FH19SC-45S-0.
5SH" manufactured by Hirose.
Pin No.
Symbol
Function
Level
Note
1~2 GND
Ground
--
3 VDD
Power supply
--
4 /RESET
Reset pin
I
5~12
R0~R7
Red data
I
13~20
G0~G7
Green data
I
21~28
B0~B7
Blue data
I
29 PCLK
Clock for Input Data
30 DISP
Dis...
Similar Datasheet
